Shop
Showing 145–169 of 169 results
-
7″ TAZ Disk – Case of 100pc ($4.00 each) $400.00100 pieces of the 7″ Taz Disk at a discounted case price of $4.00 each. Choose Grit
-
7″ Single Row Cupwheel $75.00For Hogging Down high spots, trip hazards etc in non finished type atmosphere. Will leave horseshoe marks.
-
Spanner Wrench $10.00Use to remove 7/8 arbor Cupwheels and Abrasive disks (Short and Tall AVM's). Knobs fit into Blade nut and Threaded washer holes and are offset to get down into inside of wheels. Item is included in the Shroud kits
-
6″ Hilti “Boomerang” 19mm arbor DG150 $130.00For Use on Hilti grinder vac assembly only. Alternative to Hilti Brand.
-
4.5″ 18 Seg Gritted Cupwheel FINE or MEDIUM $65.00Use for less aggressive grinding – step up to polishing. FiINE is 170/200 Grit. MEDIUM is 80/100 Grit. Only 5/8-11 threaded arbor available Medium bond, 18 premium segments.
-
-
4.5″ T-Segment Cupwheel $65.00Better for aggressive light coating removal. 30/40 Grit good for profiling concrete for another overlay. Its a Medium/Soft Bond so works better for harder concrete when medium bond ones tend to glaze over
-
Metabo PE 15-30 (615300420) ANGLE POLISHER $335.00Metabo PE15-30 Polisher. 800-3000 RPM. Polisher tool only - does not include backing pad, polish pads or dust avenger srhroud.
-
Segmented Turbo $103.00 – $163.00Professional quality blade used on hard brick pavers, granite and even cured concrete.
-
4.5″ TAZ Disk – 1/2 case of 50pc ($4.25 each) $212.5050 pieces of the 4.5″ Taz Disk at a discounted bundle price of $4.25 each. Choose Grit
-
4.5″ Super Turbo Cupwheel (Fan Cup) $65.00good for thin coating removal, 14 (7 long 7 Short) flat segments good for flatter surfaces. 30/40 grit - medium bond
-
-
4.5″ Double Row Premium Cupwheel $65.00old favorite style cupwheel. Use for grinding concrete, will leave horseshoe marks. 30/40 Grit - Medium Bond
-
4″ 18 Segment Premium Turbo Cupwheel $50.00
Most popular style. Smoother finish, no horseshoe marks. Great general purpose grinding wheel. 30/40 Grit - Medium Bond
-
General Purpose Saw Blade $128.00 – $203.00High quality, general purpose saw blade used to cut a variety of substrates.
-
4.5″ TAZ Disk – Case of 100pc ($3.50 each) $350.00100 pieces of the 4.5″ Taz Disk at a discounted case price of only $3.50 each! Choose Grit –
-
Generic Threaded Cupwheel Adaptor Nut $18.00Generic Adaptor for Cupwheels. WIll also work with 7" PCD cupwheel arbors. Taller and may or may not work under avenger shrouds properly.
-
-
4″ Super Turbo Premium Cupwheel (Fan Cup) $50.00
Good for light coating removal. 7 Long and 7 short segments for a smoother finish and little chance of horseshoe marks. 30/40 Grit - Medium Bond
-
4″ T-Segment Premium Cupwheel $50.00Better for aggressive light coating removal. 30/40 Grit good for profiling concrete for another overlay. Its a Medium/Soft Bond so works better for harder concrete when medium bond ones tend to glaze over.
-
4″ Double Row Premium Cupwheel $50.00
old favorite style cupwheel. Use for grinding concrete, will leave horseshoe marks. 30/40 Grit - Medium Bond
-
4″ 10 Segment Turbo Premium Cupwheel $35.00Great general purpose grinding wheel. Better for removal of some thin mil coatings and concrete prep in 1 step. Leaves smoother finish. 30/40 Grit - Medium Bond
-
4″ Single Row Premium Cupwheel $35.00
For aggressive concrete removal. leave horseshoe marks. 30/40 Grit - Medium Bond
-
Cup Buster – Threaded Cupwheel Removal Tool $25.00Joe Due Designed Custom tool so you can use Ratchet/ Breaker Bar/ Impact wrench to remove 7" Thread Arbor Cupwheels on Grinders with Dust Shrouds attached! Available in 3/8" or 1/2" Drive. Made from Toughest available AR500 3/8" Steel Plate. Designed to use normal readily available 5/16" or M8 bolts and hardware (you must supply yourself) as drive pins to grab the cupwheel. Slots allow for a 'one size fits most' styles. Have a favorite Cupwheel this wont fit? Maybe we can make one specifically for your application - Just ask Brad!
Showing 145–169 of 169 results