Shop
Showing 145–170 of 170 results
-
4″ 20 Grit S Segment Cupwheel – Teardrop Style $75.00
Most aggressive grit (Rougher) for faster removal of concrete. The new favorite style of cupwheel. 20 Grit - Medium Bond
-
7″ Single Row Cupwheel $75.00
For Hogging Down high spots, trip hazards etc in non finished type atmosphere. Will leave horseshoe marks.
-
Spanner Wrench $10.00
Use to remove 7/8 arbor Cupwheels and Abrasive disks (Short and Tall AVM's). Knobs fit into Blade nut and Threaded washer holes and are offset to get down into inside of wheels. Item is included in the Shroud kits
-
6″ Hilti “Boomerang” 19mm arbor DG150 $130.00
For Use on Hilti grinder vac assembly only. Alternative to Hilti Brand.
-
4.5″ 18 Seg Gritted Cupwheel FINE or MEDIUM $65.00
Use for less aggressive grinding – step up to polishing. FiINE is 170/200 Grit. MEDIUM is 80/100 Grit. Only 5/8-11 threaded arbor available Medium bond, 18 premium segments.
-
-
4.5″ T-Segment Cupwheel $65.00
Better for aggressive light coating removal. 30/40 Grit good for profiling concrete for another overlay. Its a Medium/Soft Bond so works better for harder concrete when medium bond ones tend to glaze over
-
Metabo PE 15-30 (615300420) ANGLE POLISHER $335.00
Metabo PE15-30 Polisher. 800-3000 RPM. Polisher tool only - does not include backing pad, polish pads or dust avenger srhroud.
-
Segmented Turbo $103.00 – $163.00
Professional quality blade used on hard brick pavers, granite and even cured concrete.
-
4.5″ Super Turbo Cupwheel (Fan Cup) $65.00
good for thin coating removal, 14 (7 long 7 Short) flat segments good for flatter surfaces. 30/40 grit - medium bond
-
-
4.5″ Double Row Premium Cupwheel $65.00
old favorite style cupwheel. Use for grinding concrete, will leave horseshoe marks. 30/40 Grit - Medium Bond
-
4″ 18 Segment Premium Turbo Cupwheel $50.00
Most popular style. Smoother finish, no horseshoe marks. Great general purpose grinding wheel. 30/40 Grit - Medium Bond
-
General Purpose Saw Blade $128.00 – $203.00
High quality, general purpose saw blade used to cut a variety of substrates.
-
Generic Threaded Cupwheel Adaptor Nut $18.00
Generic Adaptor for Cupwheels. WIll also work with 7" PCD cupwheel arbors. Taller and may or may not work under avenger shrouds properly.
-
-
4″ Super Turbo Premium Cupwheel (Fan Cup) $50.00
Good for light coating removal. 7 Long and 7 short segments for a smoother finish and little chance of horseshoe marks. 30/40 Grit - Medium Bond
-
4″ T-Segment Premium Cupwheel $50.00
Better for aggressive light coating removal. 30/40 Grit good for profiling concrete for another overlay. Its a Medium/Soft Bond so works better for harder concrete when medium bond ones tend to glaze over.
-
4″ Double Row Premium Cupwheel $50.00
old favorite style cupwheel. Use for grinding concrete, will leave horseshoe marks. 30/40 Grit - Medium Bond
-
4″ 10 Segment Turbo Premium Cupwheel $35.00
Great general purpose grinding wheel. Better for removal of some thin mil coatings and concrete prep in 1 step. Leaves smoother finish. 30/40 Grit - Medium Bond
-
4″ Single Row Premium Cupwheel $35.00
For aggressive concrete removal. leave horseshoe marks. 30/40 Grit - Medium Bond
Showing 145–170 of 170 results