Abrasive Disks - Coating Removal

Silica Carbide abrasive disks are used when coatings or adhesives will clog up diamond segments upon removal.  They will not give the concrete any tooth for another coating.   They are inexpensive and last around 100-200 square ft.   Also used to remove bondo, fiberglass, wood, and sculpt ice!

 

Showing all 6 results

  • 7″ Taz Disk $3.99

    Same Performance and life as a Zec Disk but less expensive! Take off Mastic, Urethane, Thinset, fiberglass, other coatings etc. Will not grind or harm concrete. 8,16,24,36 grit available Use A TAll AVM nut to use blade under Dust shroud!

  • 4.5″ Taz Disk $2.99

    Same Performance and life as a Zec Disk but less expensive! Take off Mastic, Urethane, Thinset, fiberglass, other coatings etc. Will not grind or harm concrete. 8,16,24,36 grit available Use A Short AVM nut to use blade under Dust shroud!

  • 7″ TAZ Sample Pack $30.00

    Includes 5) 7″ Taz discs of various grits (8, 16, 24, 36) with a Tall AVM to attach to your grinder, and use under the Dust Avenger 007 Shroud so you can grind dustless!

  • 4.5″ TAZ Sample Pack $25.00

    Includes 5) 4.5″ Taz discs of various grits (8,16,24,36) with a Short AVM to attach to your grinder, and use under the Dust Avenger 005 Shroud so you can grind dustless!

  • Tall AVM $15.00

    Adapting nut for 7" Abrasive Disks with correct offset use under our Avenger 007 dust shroud.  Uses factory type spanner wrench to tighten/loosen threaded washer.

  • Short AVM $15.00

    Adaptor nut to attach 4.5" Abrasive Disks to Grinder, Has correct offset to use under our Dust Avenger 005 Dust Shroud.  use factory type spanner wrench to remove and tighten threaded washer.

Showing all 6 results