Showing 1–48 of 155 results
-
Longo Type Bags – Box $100.001 box of replacement Longo Bags for Z10, Z20 and Ermator S13 , S26 vacuum units
-
“Little Red” Ruwac WNS2220 $2,500.00"Little Red" 200CFM 110V 2 headed Ruwac. 25' Hose included in price. Great contractor tough vac for concrete dust. All self contained shaker bar filter cleaning system. Will run for hours on end and filter lasts for 3-5 years w/ continued use. Call for shipping quote.
-
7″ Arrow Segment DIY Econo Grade Cupwheel $80.00Arrow Segments beter for coating removal. 30/40 Grit Medium bond. DIY Grade. Good Life
-
7″ S Segment DIY Econo Grade Cupwheel $66.00S Segment / cobra style. 30 Grit – Medium bond. Aggresive Cupwheel segments for removal and profiling for overlays. Good life
-
7″ 24 Segment Turbo DIY Econo Grade Cupwheel. $60.0024 Seg cup. 30/40 Grit Medium bond. Good performance for the budget minded.
-
7″ 12 Segment Turbo DIY Econo Grade Cupwheel $48.0012 Seg cup. 30/40 Grit Medium bond. Good performance for the budget minded. Better for light coating removal but less life than the 24 Seg.
-
4.5″ 14 Segment Turbo DIY Econo Grade Cupwheel $20.00General purpose for concrete grinding and floor prep for coatings. 30/40 grit – medium bond. 5/8″-11 Threaded arbor only
-
8″ x .090 General Purpose DIY Econo Grade Saw Blade $25.00Decent quality diamond saw blade for cutting or cleaning out control joints. 5/8-7/8 Arbor for mounting on angle grinders or walk behind saws.
-
10″ x .090 General purpose DIY Grade Econo Saw Blade $30.00Segmented diamond blade for cutting or cleaning concrete control joints, or when you have to cut extra deep. 5/8-7/8 arbor
-
Dust Cobra – Stihl TS420 Handheld Kit $750.00Dust Cobra for handheld cutting applications with Stihl TS420 Chop Saw. Cut joints, slab, curbs, brick block etc. Easily attaches where rubber bottom feet mount with the OEM screws. Lightweight (8 lbs)and very durable Urethane construction. The black saw piece is not included with the kit, it is mounted to be shown for reference only.
-
14″ x .125″ General Purpose DIY Econo Grade Saw Blade $60.00Decent Quality diamond blade for mounting on handheld chop saws or walk behind saws. Cheaper than paying rental fees from your local hardware store!
-
Tuck Point Square Segmented – 1/4″ or 3/8″ Wide $36.00 – $105.00Used to remove old mortar, tuck point, cut faux grout lines or sometimes clean out control joints. 4" - 8" diameters avaiable. .250" or .375" widths (1/4" or 3/8" wide segments)
-
ZOOM Z20 – 236 CFM HEPA Concrete Vacuum $2,250.00If you like the design and Function of the Ermator S26 2 motor vacuum, you will be happy to know you can get the same results with Joe Due's ZOOM Z20 Dust collector. 2 motor, 236 CFM 16 Amp with HEPA filter. Use with longopac bagging system for continuous use. Comes assembled and includes 20' of 2" hose and a stand up wand with floor tool.
-
ZOOM Z10 – 118 CFM HEPA concrete vacuum $1,650.00If you like the design and function of the Ermator S13 1 motor vacuum, you will be happy to know you can get the same results with Joe Due's ZOOM10 Dust collector. 1 motor, 119 CFM 8 Amp with HEPA filter. Includes 1.5" 20' of hose and a wand with floor tool. 70" of continuous plastic bag included and installed. Comes assembled and (almost) ready to run out of the box
-
Diamond Router Bits $20.00 – $30.00Diamond Router Bits. Must be used WET. 1/4" Shaft fits normal routers or high speed drills. Has metal core. 3 sizes available. clearance item, this is all remaining stock. 1/4" round, 3/4" round, and 3/4" Cone.
-
Saw Skid Plate Shoe for Soff Cut $50.00 – $75.00Skid Plate Shoe for Husqvarna Soff Cut Saws. old and new style versions available. please inqure.
-
7″ Stegosaurus – 1/4 Round PCD Blade – 9 Seg $200.00The Stegosaurus is a PCD (poly crystalline diamond) cupwheel with 9 big 1/4 round segments for aggressively removing thicker and tougher coatings that will clog up normal style diamond segmented cupwheels and tooling. 5/8-11 threaded with shock absorber arbor nut
-
7″ T-Rex Cupwheel (PCD Blade) 12 tooth $175.00Specifically designed to aggressively remove coatings from concrete. 2 rows of Little teeth (12 total) are very hard Poly Crystaline Diamond (PCD) and tear through coatings very quickly. 5/8-11 threaded. Will fit under shroud kits
-
Traditional Crack Chasing V Blades – $45.00 – $205.00This is a premium grade V-Shape segmented crack chaser perfect for general concrete contractors, restoration and repair specialists and crack repair professionals.
-
5″ DRY Polishing Pads $25.005" velcro backed resin DRY polishing of Granite or Marble. Pads available in 50 - 3000 Grit.
-
Segmented Saw Blades – Best Premium Quality Available $22.00 – $77.00Premium quality, general purpose saw blades for concrete cutting a variety of materials.
-
5″ WET Polishing Pads $20.005" WET ONLY velcro backed Polishing pads for granite, marble, concrete. 50-1500 grit available. Non Stock Item, Allow 1 week for delivery
-
4″ DRY Polishing Pads $20.004" DRY or WET Velcro back diamond resin Polishing Pads. 50-3000 grit available.
-
4″ WET Polishing Pads $12.004″ WET Velcro backed diamond Polishing Pads. Premium Quality, 2.2mm segment height. 50-3000 grit available.
-
Ceramic Tile $10.00 – $45.00Ceramic tile blade. .060" wide segment. Dry or Wet cut. Premium Quality
-
J-Slot Porcelain $15.00 – $50.00.060" wide diamond rim with J Slot for cutting through Porcelain and Tile. 5/8" Arbor hole for use on tile saws or angle grinders. Dry or Wet cut. Best Quality available.
-
Traditional V Blade – Threaded 5/8-11 arbor $55.00 – $110.00Only 4" and 7" available. Threaded arbor built in, so no attachment nuts needed. Just spin on and go!
-
Solid Rim V Blade – $57.50 – $65.00Threaded & Continuous Rim V blades. 5/8-11 threaded nut integrated into the blade. Premium Quality 12.7mm segment. Medium Bond Great for intricate detail work in decorative concrete or crack repair. Fits Angle Grinders with 5/8" spindle
-
4.5″ Stegasaurus (PCD) $125.00The Stegosaurus is a PCD (poly crystalline diamond) cupwheel with 5 big 1/4 round segments for aggressively removing thicker and tougher coatings that will clog up normal style diamond segmented cupwheels and tooling. 5/8-11 threaded with shock absorber arbor nut
-
7″ 20 Grit Purple Ram Cupwheel $125.00New Style Cupwheel. Aggressive 20 Grit segments. Medium bond. Silimiar to Red S Segment cupwheel in life and performance.
-
7″ 20 Grit RED S Segment Cupwheel $125.003 Piece S segment (Cobra style) as pictured. Rougher 20 grit and leaves a better bonding profile than normal 30/40 grit Cups. Very aggresive grinding for concrete removal and floor prep. Increasingly popular blade. Great performance.
-
7″ 20 Grit Teardrop Style Cupwheel $125.00teardrop style segments as pictured. Rougher 20 grit and leaves a better bonding profile than normal 30/40 grit Cups. Very aggresive grinding for concrete removal and floor prep. Increasingly popular blade. Great performance.
-
7″ 30/40 Grit S Segment Cupwheel $125.003 Piece S segment. General Purpose Ok for thin coatings. Normal 30/40 Grit Medium Bond.
-
7″ 24 Segment Turbo Premium Cupwheel$100.00$60.00BANANA DEAL Most popular - Great General Purpose Grinding Wheel. Level high spots, prep floors, and clean edges. Leaves smoother finish. About 40 hours of grinding life. Premium quality - 30/40 Grit - Medium Bond
-
7″ 24 Segment Turbo FINE or MEDIUM Grit $100.00Use for less aggressive grinding - step up to polishing. FiINE is 170/200 Grit. MEDIUM is 80/100 Grit. Only 5/8-11 threaded arbor available Medium bond, premium segments.
-
Metabo ASR35 ACP Vacuum Cleaner with HEPA Filter $750.00Metabo # US602057800 - HEPA filtration - Great vacuum you can use with 1 Grinder. You can plug you concrete Grinder right into the Vacuum and the vac turns on when the tool does. Variable popwer know to dial in suction/ amps to your needs. Accepts either 1 1/4" or 2 1/4" shopvac hose. 9 Gallon Bin. Bags available as well.
-
Dust Avenger 007 Assembly w/ Convertible Shroud $435.007" Dustless Surface Grinder Assembly. Ideal For: Dustless Surface Grinding, Cleaning for Protective Coating Profile, Leveling Uneven Concrete, Lowering High Spots, Edging Against Walls Where Large Grinders or Shot Blasters Will Not Reach.
-
3″ WET Polishing Pads $10.003" WET ONLY Velcro backed Polishing pads for granite, marble, concrete. 50-1500 grit available. Non Stock Item, Allow 1 week for delivery
-
7″ 10 Segment Arrow Premium Cupwheel $100.00Aggressive grinding and coating removal. 10 Thick Segments. may not work well under avenger shrouds due to segment height
-
7″ Metabo Grinder MVT 24-230 $235.00Model Number W24-230 7" (or 9"), 6600 RPM, 15 amp. Just the replacement grinder itself. 24-230 debuted in Aug 2010
-
Trapezoids PCD -CW – Clockwise $30.00PCD segment screw on type trap - Clockwise rotation (CW) Sold each - does not qulaify for mix and match discount pricing
-
Trapezoids – PCD – CCW Counter Clockwise $30.00PCD segment Counter clockwise rotation (CCW) - Screw on type Sold each - does not qualify for mix and match pricing
-
Trapezoids – Hard Bond – Dbl Bar – Black $23.00 – $30.00Hard Bond for soft concrete, double bar style trapezoid - Black in color grits available 16/20 30/40 60/80
-
Trapezoids – Medium/Hard bond – Dbl Bar – Red $21.00 – $28.00Medium/Hard bond for soft/medium concrete in double bar style screw on trapezoids Orange in color grits available 16/20 30/40 60/80
-
Trapezoids – Medium bond – Dbl Bar – Blue $20.00 – $24.00Medium bond, double bar style, (medium to hard concrete) trapezoid screw on segment Blue in color Grits available 16/20 30/40 60/80
-
Core bit Adapter for Hilti Set$125.00$99.00Allows Hilti core drills (6 or 3 slotted) to used non hilti brand bits. (save $). Priced/sold as a set (2 pieces)
-
Trapezoids – Soft Bond – Dbl Bar – Gold $20.00 – $24.00Trapezoid diamond tooling in soft bond with 2 bars Gold in color Grits available 16/20 30/40 60/80
-
Trapezoids – Soft Bond – Single Bar – Gold $14.00 – $16.00Trapezoid diamond tooling in soft bond with single bar gold in color grits available 16/20 30/40 60/80