Shop
Showing 97–144 of 163 results
-
Metabo PE 15-30 Polisher Avenger Assembly $435.00
Metabo PE 15-30 polisher (615300420) 800-3000 RPM with Avenger shroud for dry dustless handheld polishing. 1500W/13amp Polisher with factory metabo loop handle, 005 avenger shroud, adapting collar, flower washer, and a 5" velcro backpad included in assembly
-
4″ Head for “The Scraper” $88.00
Head only, handles listed seperately. Head comes with one spare light duty blade.
-
-
Quad Blocks w/ holding case (set of 3) $175.00
Economic alternative to dymacerts. 30/40 grit - Medium bond. Plastic wedges included. Comes with built in holding case. Sold per set of 3 as pictured
-
8″ x .375 Bevel Blades (1 Pair) $350.00
Price for 2 Blades. Use for making a 3/4" Wide V Cut. Need to place 2 blades back to back. Used for Double "T" deck joint repair. 1" arbor
-
12″ x .375 Bevel Blades (1 Pair) $550.00
Price for 2 Blades. Use for making a 3/4" Wide V Cut. Need to place 2 blades back to back. Used for Double "T" deck joint repair. 1" arbor
-
14″ x .375 Bevel Blades (1 Pair) $675.00
Price for 2 Blades. Use for making a 3/4" Wide V Cut. Need to place 2 blades back to back. Used for Double "T" deck joint repair. 1" arbor
-
4″ Heavy Duty Razor Blades for “The Scraper” – Box of 100pc $150.00
Heavy Duty razor blades for The Scraper. $1.50 each. 100 blades per Box.
-
Dust Cobra – Stihl Cart Kit $375.00
Patent Pending Design. A contractor tough Dust Shroud for handheld cut off saws. Works on a down cut (pushing). Has 4" vacuum port. Durable urethane body. Easily adapts in place of mudflap with OEM hardware!!! Non marking and lightweight
-
Dust Cobra – Stihl TS420 Handheld Kit $375.00
Dust Cobra for handheld cutting applications with Stihl TS420 Chop Saw. Cut joints, slab, curbs, brick block etc. Easily attaches where rubber bottom feet mount with the OEM screws. Lightweight (8 lbs)and very durable Urethane construction. The black saw piece is not included with the kit, it is mounted to be shown for reference only.
-
Blade Nut $20.00
Adapting Blade nut for cupwheels and diamond blades to use with our dustless shroud kits. To be used in conjunction with the Arbor Nut to gain correct offset when using 5/8-7/8 arbored blades. 1 1/2 Hex with holes for spanner wrench.
-
Dust Mizer 005 Assembly $375.00
Ideal For: Dustless Handheld Cutting or Crackchasing. WEV 15-125 HT 13.5 amp Metabo Grinder With Stainless Steel Dust Mizer Shroud and hardware. Cut up to 1" deep w/ 5" Blade. Accepts up to 3/8" wide blade.
-
4″ Light Duty Razor Blades for “The Scraper” $42.00
Box of 100 light duty razor blades for 4" scrapers.
-
8″ Head for “The Scraper” $105.00
8" head only. Handles listed seperately. Includes 1) 8" scraper blade
-
8″ Heavy Duty Razor Blades for “The Scraper” – pack of 10 $28.00
Pack of 10 - 8" heavy duty razor blades for the 8" scraper head.
-
5″ Loop Handle $60.00
Here is our new "No Slip Grip" Solid Aluminum Handle for small 4-6" angle grinders. Designed to use work along with our dust shroud setups. Loop designed for a Metabo but will fit various grinders with a little tweaking and persuasion.
-
Arbor Nut – w/ Saddle $20.00
Adapting Arbor nut for cupwheels and diamond blades to use with our dustless shrouds. To be usedin conjunction with the Blade Nut to gain correct offset when using 5/8-7/8 arbored blades. Has the saddle on bottom
-
Dust Cobra – Stihl TS700 Handheld Kit $375.00
Dust Cobra for handheld cutting applications with Stihl TS700 Chop Saw. Cut joints, slab, curbs, brick block etc. Easily attaches where rubber bottom feet mount with the OEM screws but longer ones may be needed. Lighhtweight (8 lbs)and very durable Urethane construction. The black Stihl saw foot piece is not included with the kit, it is mounted to be shown for reference only.
-
Vacuum Floor Wand – Generic brand $82.00
floor wand to connect to ruwac hose. generic brand- not Ruwac
-
4.5″ 20 Grit “The Red One” $85.00
Our customer favorite. 20 Grit Cupwheel for better profile and most aggressive grinding w/o horseshoe marks. Roughest grit available.
-
5′ Scraper Handle $70.00
60" Scraper handle only. Has padded grip. Attaches 4" or 8" scraper heads. Heads sold seperately. 20" handle pictured.
-
20″ Floor Tool – Generic Brand $185.00
Floor tool - generic brand, not Ruwac. Connects to wand. Includes the brushes and squeegee.
-
Squeegees – replacement set of 2 – Generic brand $35.00
pair of squeegees, fit 20" floor tool sold above, not RUWAC Brand
-
Wand floor tool replacement brushes $35.00
pair of Brushes, fit 20" floor tool sold above, not RUWAC Brand
-
Hose Cuffs for Grey Crushproof Hose $15.00
Hose Cuffs. These screw onto the end of the hose left hand thread. 2.25" OD - 2" ID for attaching to Ruwac pokeys.
-
Dust Mizer 005 Shroud only $100.00
Stainless Steel Shroud only. no hardware to attach grinder. Accepts up to a 5" diameter blade 3/8" wide. Has adjustable depth shoe.
-
Slotless Arbor Nut (for Dewalt & Milwaukee) $20.00
Arbor nut w/o the saddle for Dewalt and Milwaukees grinders. Comes with kits. Regular Saddled Arbor nuts do not work correctly on these grinders, they push the blade out too far. These can work with other makes of grinders also.
-
Tall AVM $15.00
Adapting nut for 7" Abrasive Disks with correct offset use under our Avenger 007 dust shroud. Uses factory type spanner wrench to tighten/loosen threaded washer.
-
Dust Avenger 005 Basic Kit – Fits Metabo Cordless Grinder $89.00
Avenger 005 Kit fits on Metabo latest Cordless Grinder platform! Basic kit include the Orange Shroud, flower washer and adapting collar. Grinder and blade shown for illustraion purposes and not included.
-
Short AVM $15.00
Adaptor nut to attach 4.5" Abrasive Disks to Grinder, Has correct offset to use under our Dust Avenger 005 Dust Shroud. use factory type spanner wrench to remove and tighten threaded washer.
-
Extra Tall Blade and Arbor Nut – SET $50.00
these are custom cup wheel adaptor nuts that are +5/16″ taller than the normal ones for use use on short dome cup wheels to use under the Avenger Shrouds. This is a custom application, and you should not order them unless you understand the Avenger system and why you would need these. come as a […]
-
25′ Crushproof Hose (works with 2 motor Ruwac vacs – 2″ ID) $135.00
25 ft Replacement crushproof Hose. 2.5" hose. Cuffs are 2" ID for Ruwac pokeys. Can cut hose and buy additional cuffs. Cuffs Left hand thread onto hose
-
Trapezoids – Hard Bond – DBl Button – Black $27.00
Double button style, hard bond (soft concrete) screw on style trapezoids black in color - grits available 120/150 250/300
-
4.5″ 18 Segment Turbo Cupwheel $42.25
Most popular. Great general purpose grinding wheel. Smooth finish.
-
-
Trapezoids – Medium/Hard bond – DBL Button – Red $26.00
Medium/Hard bond, double button style screw on trapezoids red in color 120/150 250/300 grits
-
Trapezoids – Medium bond – DBL Button – Blue $23.00
Double button style in medium bond for medium/hard concrete Blue in color Grits 120/150 250/300
-
Trapezoids – Soft Bond – DBL Button – Gold $23.00
Soft bond button style (2) trapezoid tooling Gold in Color 120/150 250/300 Grits
-
7″ T 14 Segment Cupwheel $75.00
Better for aggresive light coating removal. 30/40 Grit good for profiling concrete for another overlay. Its a Medium/Soft Bond so works better for harder concrete when medium bond ones tend to glaze over.
-
7″ Single Row Cupwheel $75.00
For Hogging Down high spots, trip hazards etc in non finished type atmosphere. Will leave horseshoe marks.
-
4″ 20 Grit S Segment Cupwheel – Teardrop Style $75.00
Most aggressive grit (Rougher) for faster removal of concrete. The new favorite style of cupwheel. 20 Grit - Medium Bond
-
7″ 12 Segment Turbo Cupwheel $60.00
Great general purpose grinding wheel. Better for removal of some thin mil coatings and concrete prep in 1 step. Leaves smoother finish.
-
Spanner Wrench $10.00
Use to remove 7/8 arbor Cupwheels and Abrasive disks (Short and Tall AVM's). Knobs fit into Blade nut and Threaded washer holes and are offset to get down into inside of wheels. Item is included in the Shroud kits
Showing 97–144 of 163 results