005 / 5"

Showing all 15 results

  • 5″ Metabo Grinder WEV 15-125 HT Original price was: $210.00.Current price is: $190.00.

    WEV 15-125 HT 13.5 amp Variable speed Metabo grinder (2800-9600 rpm no load).   This is for the grinder only.

  • Metabo PE 15-30 (615300420) ANGLE POLISHER Original price was: $335.00.Current price is: $284.75.

    Metabo PE15-30 Polisher.   800-3000 RPM.   Polisher tool only - does not include backing pad, polish pads or dust avenger srhroud.

  • Dust Avenger 005 Convertible Shroud only Original price was: $75.00.Current price is: $63.75.

    Replacement convertible shroud for open floor grinding and edging, no hardware included.  This is for the urethane shroud only.

  • Adapting Collar for 005 4- 6″ grinders Original price was: $50.00.Current price is: $40.00.

    Aluminum adapting rig for make and model specific grinders to attach grinders to the dust shrouds.

  • Small Flower Washer Original price was: $16.00.Current price is: $13.60.

    Flower shaped washer protects Dust Avenger 005 shroud from cupwheel.

  • Blade Nut Original price was: $20.00.Current price is: $17.00.

    Adapting Blade nut for cupwheels and diamond blades to use with our dustless shroud kits. To be used in conjunction with the Arbor Nut to gain correct offset when using 5/8-7/8 arbored blades. 1 1/2 Hex with holes for spanner wrench.

  • Arbor Nut – w/ Saddle Original price was: $20.00.Current price is: $17.00.

    Adapting Arbor nut for cupwheels and diamond blades to use with our dustless shrouds. To be usedin conjunction with the Blade Nut to gain correct offset when using 5/8-7/8 arbored blades. Has the saddle on bottom

  • Slotless Arbor Nut (for Dewalt & Milwaukee) Original price was: $20.00.Current price is: $17.00.

    Arbor nut w/o the saddle for Dewalt and Milwaukees grinders. Comes with kits. Regular Saddled Arbor nuts do not work correctly on these grinders, they push the blade out too far. These can work with other makes of grinders also.

  • Spanner Wrench Original price was: $10.00.Current price is: $8.50.

    Use to remove 7/8 arbor Cupwheels and Abrasive disks (Short and Tall AVM's). Knobs fit into Blade nut and Threaded washer holes and are offset to get down into inside of wheels. Item is included in the Shroud kits

  • 2.5” Shopvac hose x 8′ long Original price was: $22.00.Current price is: $18.70.

    8’ x 2.5” plastic Shopvac hose

  • Short AVM Original price was: $15.00.Current price is: $12.75.

    Adaptor nut to attach 4.5" Abrasive Disks to Grinder, Has correct offset to use under our Dust Avenger 005 Dust Shroud.  use factory type spanner wrench to remove and tighten threaded washer.

  • Brushes – Replacement for Metabo Grinders $20.00

    Select model/ part number for replacement Carbon Brushes for Metabo Angle Grinders.

  • Generic Threaded Cupwheel Adaptor Nut Original price was: $18.00.Current price is: $15.30.

    Generic Adaptor for Cupwheels.    WIll also work with 7" PCD cupwheel arbors. Taller and may or may not work under avenger shrouds properly.

  • Brass Reducers / Arbor Size Adaptors – Various Sizes – 10 pack $10.00

    These are Brass reducers/ Arbor adaptors commonly used in diamond blades.  These are listed as 10 pack ( $1 each adaptor).   please select size from the drop down.

  • Brass Reducer / Spacer. Pack of 10 5/8″ -7/8″ THICK $10.00

    This is a 10 pack of the brass reducers that come standard in cupwheels.  These make great spacers for getting the threaded cupwheel offeset correct to work under the dust avenger shrouds.   These are the thick ones and 5/8" - 7/8" and most popular when asked for them, so they are thier own product item  Other sizes and thickness available.

Showing all 15 results