007 / 7"

Showing all 17 results

  • 4 Pack – Metabo 24-230 Grinders Original price was: $1,150.00.Current price is: $979.00.

    Special Package Deal for Metabo 24-230  Bare replacement Grinders only (no Dust Shroud Attachments).

  • 7″ Metabo Grinder MVT 24-230 606467420 Original price was: $283.00.Current price is: $260.00.

    Model Number W24-230 7" (or 9"), 6600 RPM, 15 amp.  Just the replacement grinder itself. 24-230 debuted in Aug 2010

  • Dust Avenger 007 Convertible Shroud only Original price was: $75.00.Current price is: $63.75.

    Replacement Shroud Only, No Hardware included. Convertible shroud allows for open floor grinding as well as edging. Blue ring flips down and around out of the way of grinder head and wall.  This is the urethane shroud only.

  • Adapting Collar for 007 Kits 7″-9″ Grinders Original price was: $50.00.Current price is: $40.00.

    Aluminum adapting ring that attatches the Avenger or Mizer shrouds to the grinder. Varies for each make and model. includes 3) 1/4-20 set screws and 4) 1/4-20 x 1/2 phillips head machine screws

  • Large Flower Washer Original price was: $16.00.Current price is: $13.60.

    Flower shaped washer protects 7” shroud from cupwheel.  Included in the Avenger Kits.

  • 7″ Loop Handle Original price was: $70.00.Current price is: $59.50.

    Aluminum G-shaped handle, fits 7"-9" Metabo grinders w/ M14 bolts. Same Handle is included on the 007 Assemblies

  • Blade Nut Original price was: $20.00.Current price is: $17.00.

    Adapting Blade nut for cupwheels and diamond blades to use with our dustless shroud kits. To be used in conjunction with the Arbor Nut to gain correct offset when using 5/8-7/8 arbored blades. 1 1/2 Hex with holes for spanner wrench.

  • Arbor Nut – w/ Saddle Original price was: $20.00.Current price is: $17.00.

    Adapting Arbor nut for cupwheels and diamond blades to use with our dustless shrouds. To be usedin conjunction with the Blade Nut to gain correct offset when using 5/8-7/8 arbored blades. Has the saddle on bottom

  • Slotless Arbor Nut (for Dewalt & Milwaukee) Original price was: $20.00.Current price is: $17.00.

    Arbor nut w/o the saddle for Dewalt and Milwaukees grinders. Comes with kits. Regular Saddled Arbor nuts do not work correctly on these grinders, they push the blade out too far. These can work with other makes of grinders also.

  • Tall AVM Original price was: $15.00.Current price is: $12.00.

    Adapting nut for 7" Abrasive Disks with correct offset use under our Avenger 007 dust shroud.  Uses factory type spanner wrench to tighten/loosen threaded washer.

  • Extra Tall Blade and Arbor Nut – SET Original price was: $50.00.Current price is: $42.50.

    these are custom cup wheel adaptor nuts that are +5/16″ taller than the normal ones for use use on short dome cup wheels to use under the Avenger Shrouds.   This is a custom application, and you should not order them unless you understand the Avenger system and why you would need these.  come as a […]

  • Spanner Wrench Original price was: $10.00.Current price is: $8.50.

    Use to remove 7/8 arbor Cupwheels and Abrasive disks (Short and Tall AVM's). Knobs fit into Blade nut and Threaded washer holes and are offset to get down into inside of wheels. Item is included in the Shroud kits

  • 2.5” Shopvac hose x 8′ long Original price was: $22.00.Current price is: $18.70.

    8’ x 2.5” plastic Shopvac hose

  • Brushes – Replacement for Metabo Grinders $20.00

    Select model/ part number for replacement Carbon Brushes for Metabo Angle Grinders.

  • Generic Threaded Cupwheel Adaptor Nut Original price was: $18.00.Current price is: $15.30.

    Generic Adaptor for Cupwheels.    WIll also work with 7" PCD cupwheel arbors. Taller and may or may not work under avenger shrouds properly.

  • Brass Reducers / Arbor Size Adaptors – Various Sizes – 10 pack $10.00

    These are Brass reducers/ Arbor adaptors commonly used in diamond blades.  These are listed as 10 pack ( $1 each adaptor).   please select size from the drop down.

  • Brass Reducer / Spacer. Pack of 10 5/8″ -7/8″ THICK $10.00

    This is a 10 pack of the brass reducers that come standard in cupwheels.  These make great spacers for getting the threaded cupwheel offeset correct to work under the dust avenger shrouds.   These are the thick ones and 5/8" - 7/8" and most popular when asked for them, so they are thier own product item  Other sizes and thickness available.

Showing all 17 results