Mizer Components

Replacement parts and pieces to repair or complete your Mizer system

Showing all 14 results

  • 7″ Metabo Grinder MVT 24-230 $255.00

    Model Number W24-230 7" (or 9"), 6600 RPM, 15 amp.  Just the replacement grinder itself. 24-230 debuted in Aug 2010

  • Dust Mizer 007 Shroud only $100.00

    Stainless Steel replacement Shroud only. NO hardware to attach grinder included. See Dust Mizer Kits for everything included. Accepts up to a 7" diameter blade 3/8" wide

  • 25′ Crushproof Hose (works with 2 motor Ruwac vacs) $115.00

    25 ft Replacement crushproof Hose. 2.5" hose. Cuffs are 2" ID for Ruwac pokeys. Can cut hose and buy additional cuffs. Cuffs Left hand thread onto hose

  • Adapting Collar for 007 Kits 7″-9″ Grinders $42.00

    Aluminum adapting ring that attatches the Avenger or Mizer shrouds to the grinder. Varies for each make and model. includes 3) 1/4-20 set screws and 4) 1/4-20 x 1/2 phillips head machine screws

  • 7″ Loop Handle $60.00

    Aluminum G-shaped handle, fits 7"-9" Metabo grinders w/ M14 bolts. Same Handle is included on the 007 Assemblies

  • 5″ Metabo Grinder WEV 15-125 HT $210.00

    WEV 15-125 HT 13.5 amp Variable speed Metabo grinder (2800-9600 rpm no load).   This is for the grinder only.

  • Dust Mizer 005 Shroud only $100.00

    Stainless Steel Shroud only. no hardware to attach grinder. Accepts up to a 5" diameter blade 3/8" wide. Has adjustable depth shoe.

  • Adapting Collar for 005 4- 6″ grinders $42.00

    Aluminum adapting rig for make and model specific grinders to attach grinders to the dust shrouds.

  • Blade Nut $16.00

    Adapting Blade nut for cupwheels and diamond blades to use with our dustless shroud kits. To be used in conjunction with the Arbor Nut to gain correct offset when using 5/8-7/8 arbored blades. 1 1/2 Hex with holes for spanner wrench.

  • Arbor Nut $16.00

    Adapting Arbor nut for cupwheels and diamond blades to use with our dustless shrouds. To be usedin conjunction with the Blade Nut to gain correct offset when using 5/8-7/8 arbored blades. Has the saddle on bottom

  • 5″ Loop Handle $60.00

    Here is our new "No Slip Grip" Solid Aluminum Handle for small 4-6" angle grinders. Designed to use work along with our dust shroud setups. Loop designed for a Metabo but will fit various grinders with a little tweaking and persuasion.

  • Slotless Arbor Nut (for Dewalt & Milwaukee) $16.00

    Arbor nut w/o the saddle for Dewalt and Milwaukees grinders. Comes with kits. Regular Saddled Arbor nuts do not work correctly on these grinders, they push the blade out too far. These can work with other makes of grinders also.

  • 8’ x 2.5” hose $16.00

    8’ x 2.5” plastic Shopvac hose

  • Spanner Wrench $10.00

    Use to remove 7/8 arbor Cupwheels and Abrasive disks (Short and Tall AVM's). Knobs fit into Blade nut and Threaded washer holes and are offset to get down into inside of wheels. Item is included in the Shroud kits