Mizer Components
Replacement parts and pieces to repair or complete your Mizer system
Showing all 17 results
-
Brushes – Replacement for Metabo Grinders $20.00Select model/ part number for replacement Carbon Brushes for Metabo Angle Grinders.
-
Metabo 24-230 Grinders – Pack of 4 Original price was: $1,132.00.$949.00Current price is: $949.00.Duey Deal - 4 Metabo 24-230 replacement Grinders for $949! 15 Amp 6600 RPM Bare Grinder only new in Box. Only 1 Pallet of 36 Grinders available for this Promotion (9). Price Good for 1 Week or Until sold out.
-
Brass Reducers / Arbor Size Adaptors – Various Sizes $1.00These are Brass reducers/ Arbor adaptors commonly used in diamond blades. These are listed as $1 each adaptor. please select size from the drop down.
-
7″ Metabo Grinder MVT 24-230 606467420 $283.00Model Number W24-230 7" (or 9"), 6600 RPM, 15 amp. Just the replacement grinder itself. 24-230 debuted in Aug 2010
-
Adapting Collar for 007 Kits 7″-9″ Grinders $50.00Aluminum adapting ring that attatches the Avenger or Mizer shrouds to the grinder. Varies for each make and model. includes 3) 1/4-20 set screws and 4) 1/4-20 x 1/2 phillips head machine screws
-
7″ Loop Handle $70.00Aluminum G-shaped handle, fits 7"-9" Metabo grinders w/ M14 bolts. Same Handle is included on the 007 Assemblies
-
5″ Metabo Grinder WEV 15-125 HT $210.00WEV 15-125 HT 13.5 amp Variable speed Metabo grinder (2800-9600 rpm no load). This is for the grinder only.
-
Dust Mizer 007 Shroud only $60.00Stainless Steel replacement Shroud only. NO hardware to attach grinder included. See Dust Mizer Kits for everything included. Accepts up to a 7" diameter blade 3/8" wide
-
Adapting Collar for 005 4- 6″ grinders $50.00Aluminum adapting rig for make and model specific grinders to attach grinders to the dust shrouds.
-
5″ Loop Handle $60.00Here is our new "No Slip Grip" Solid Aluminum Handle for small 4-6" angle grinders. Designed to use work along with our dust shroud setups. Loop designed for a Metabo but will fit various grinders with a little tweaking and persuasion.
-
Blade Nut $20.00Adapting Blade nut for cupwheels and diamond blades to use with our dustless shroud kits. To be used in conjunction with the Arbor Nut to gain correct offset when using 5/8-7/8 arbored blades. 1 1/2 Hex with holes for spanner wrench.
-
Dust Mizer 005 Shroud only $100.00Stainless Steel Shroud only. no hardware to attach grinder. Accepts up to a 5" diameter blade 3/8" wide. Has adjustable depth shoe.
-
Arbor Nut – w/ Saddle $20.00Adapting Arbor nut for cupwheels and diamond blades to use with our dustless shrouds. To be usedin conjunction with the Blade Nut to gain correct offset when using 5/8-7/8 arbored blades. Has the saddle on bottom
-
Slotless Arbor Nut (for Dewalt & Milwaukee) $20.00Arbor nut w/o the saddle for Dewalt and Milwaukees grinders. Comes with kits. Regular Saddled Arbor nuts do not work correctly on these grinders, they push the blade out too far. These can work with other makes of grinders also.
-
25′ Crushproof Hose (works with 2 motor Ruwac vacs – 2″ ID) $135.0025 ft Replacement crushproof Hose. 2.5" hose. Cuffs are 2" ID for Ruwac pokeys. Can cut hose and buy additional cuffs. Cuffs Left hand thread onto hose
-
Spanner Wrench $10.00Use to remove 7/8 arbor Cupwheels and Abrasive disks (Short and Tall AVM's). Knobs fit into Blade nut and Threaded washer holes and are offset to get down into inside of wheels. Item is included in the Shroud kits
Showing all 17 results